Project Description

Göksu
RASCAL 1500 TS

LOA (m): 14.95
Beam moulded(m): 8.30
Draft extreme (m): 2.65
Fuel oil (m3): 16.60
Main Engine Power (kW): 2×447kw
Speed ahead (knots): 10
Bollard Pull ahead (tons): 13

RAscal 1500 TS

The RAscal Class of compact tugs have been developed exclusively by Robert Allan Ltd., to address the challenges of modern, line-handling tugs. The RAscal hull form has been carefully developed, based on a wide array of previous successful tug designs, to ensure good sea-keeping, maneuverability, and stability in all modes of operation.

The RAscal 1500 TS design is a high performance, twin screw, diesel-powered line-handling tug, designed for maximum efficiency in the performance of line-handling, ship-handling and related terminal support activities. The vessel is equipped with heavy bow fendering for ship-assist work. A towing bitt and tow-hook are fitted aft for line-handling and general towing duties. The vessel is designed for operation with a minimum crew.

The hull, deckhouse, and wheelhouse are of all-welded steel construction with scantlings in excess of the minimums of any Classification Society. The vessel is equipped with heavy duty deck equipment and all-round fendering for all ship-handling operations

Technical Details

Length O.A 14.95 m
Beam moulded 8.30 m
Depth moulded 3.00 m
Draft max 2.65 m
Draft hull 2.25 m

Fuel oil = 16.6 m
Fresh water = 2.0 m3
Black water = 1.2 m3
Grey water = 1.2 m3
Oily water = 0.85 m3
Ballast water = 20.8 m3

Main Engines Caterpillar C18
Engine Power 2 x 447 kW @ 1800 rpm
Gearbox ZF W650 3.605:1 Reduction Ratio
Propellers Kaplan 5 Blade Propeller, 1170 mm DIA
Nozzle Mild Steel with stainless steel inner surface
Shafting Stainless steel straight line shaft
Steering Gear Data Hydraulic Steering Gear
Resilient Mounts Vulkan T12

Speed ahead approx 10 knots
Bollard pull ahead 13 tons
Gen Sets 2 x CAT C4.4
Power 51 kW

Towing Hook
Data hydraulic DTH 15-30P
Pneumatic auto-release
Located on aft tow bitt
Below deck, two double cabins, wc, shower and pantry. Floors covered with IMO approved teak imitating covering. Very high level of quality, comfort and safety suiting the requirements of flag authorities such as Germany, Italy and UK.
Heavy duty rubber fender system as follows:
Bow 500 OD x 250 ID cyclindrical
Stem W type
Sides D type
Stern W type
All accommodation space is heated vented and air-conditioned.
Special care has been given to resilient mount all engines and essential equipment including hydraulic pipes. Sound levels are according to requirements of flag authorities.
Fuel Separator
Vacuum Toilet
Heated windows and Wipers
Fresh water ultraviolet sanitizer
Heated floors for wet spaces
ABS, +A1, +AMS, Towing Vessel